notch|notched|notches|notching in English
verb
[nɑtʃ /nɒ-]
groove; cut; make a notch in; score a point
Use "notch|notched|notches|notching" in a sentence
1. Having a margin or contour with shallow, usually rounded notches and projections; finely notched or scalloped: a Crenulate leaf; a
2. (4) before I knew it, I was Abeam the ship (5) Be consistent - drop notches of flaps in the same place on every landing, e.g., first notch when you're downwind Abeam , second on base, last notch on final
3. And Bracketed stairs are stronger than stairs with notched stringers, because the 2x12 stringers aren't weakened by notches that effectively leave only 2x6s to support the loads on the stairs
4. Geometric-Notched Right Arrow
5. January 2021 Better Bunching, Nicer Notching
6. Geometric-Notched Left Arrow
7. 6 New York City is notching provocative successes.
8. Fixed or variable angle corner-notching machines
9. Bending , folding , flattening , shearing , punching and notching machines : * *
10. One firm has developed a system that “notches,” or cuts out, a narrow band of frequency in a recording so that circuits set up to react to the notch will automatically shut off a tape recorder.
11. Cutting, drilling, punching, mitring, notching, routing, chamfering of metal extrusions
12. In fact, the notches were for climbing.
13. Attached (adnexed to adnate) and often notched.
14. Hybrid notch filter
15. Place Croissants with the notched side towards you
16. ‘Because the ram was the only ship-smashing weapon available, fleets fought in line Abeam so as to present as many rams to the enemy as possible.’ ‘Be consistent - drop notches of flaps in the same place on every landing, e.g., first notch when you're downwind Abeam, second on base, last notch on final.’
17. The processor may filter the digital samples with a notch filter having an adjustable notch frequency and/or an adjustable notch bandwidth.
18. Ashler Notched Slate. Concrete Stamp Set – 11 piece
19. The longitudinal adjustment device shall be placed with the locking device engaged in the position that is nearest to midway between the foremost and rearmost positions; if this position is between two notches, the rearmost notch shall be used.
20. The longitudinal adjustment device is placed with the locking device engaged in the position that is nearest to midway between the foremost and rearmost positions; if this position is between two notches, the rearmost notch is used.
21. Machines for bending, folding, straightening, shearing, punching and notching metal, numerically controlled
22. This means that the system only improves, always notching forward, never backsliding.
23. Enhanced quadrature notch filter
24. Electrically tunable notch filters
25. Switched capacitor notch filter